How do I know how much power I need?
First, gather a list of all electrical equipment to be powered on in your booth. Consider some of the following elements: lighting, computer equipment,
plasmas, company products, AV equipment, and lead retrieval machine. Next, you will want to notate where in your booth space the items will be placed
and retrieve the power required for each item. The power voltage/wattage/amperage can be found on the equipment tag located in the back of the item.
Typically most items require 110/120 volt power. Machinery leans more towards the 208 or 480 volt power ordered either in single phase or 3 phase.
Now you can start calculating how power will be required in each area in your booth space. Start by combining the wattage for the 110/120 volt
devices in each area and select an outlet that meets or exceeds this total. It is safer to slightly overestimate your power requirements to help minimize
tripping or outages. You must order separate outlets for each electrical appparatus with a minimum of 5 amp at each location.
Is this price listed for power per day?
Where does the power come from?
The power sources come from different areas depending on the halls. Halls may have catwalks available which means the power will drop from the
ceiling. In other halls, the power comes from the columns or floor ports placed throughout the exhibit hall meaning the power is run along the floor (380
volt/480 volt power must be run overhead for safety reasons. Additional costs apply.) For the outdoor lots, power is pulled from either the building,
generator, or alternate source and run along the floor. No outside/external additional power sources are allowed. All show power must be provided by
the official Electrical Service Contractor unless special approval is provided.
Where will my power be located?
For inline and peninsula booths, you will find your power located on the back side of your booth space. Island/Pavilion booth exhibits will need to
submit a diagram indicating where your main power source needs to start from. If GES does not receive this information, the power will be installed in
the center of your booth. Any movements of the main power source after installation will be chargeable on time and materials basis. The first ninety feet
of cabling to deliver power to your booth is free. If additional cabling is necessary to power your booth, it will be charged on material and motorized
equipment basis. If additional cabling is necessary to power your booth, it will be charged on time, material, and motorized equipment basis.
In the following diagrams, the symbol represents the approximate location of power outlets. Main drop locations must be indicated on the floor plan as
MDL. For Island or Pavilion booths, you need to designate one location for each outlet you order. Multiple outlet locations will be charged on a time,
equipment and material basis.
One drop will be provided within the booth when power source is in the ceiling or one location on perimeter when power is in the floor.
What is a Main Drop Location (MDL)/Additional Drop?
MDL is the main power source located in your booth. Power is then distributed from this point. If you do not want cords run on the floor throughout
your booth, you may choose to request additional drops within your booth space billed on time, equipment, and material basis. The location of the main
drop should be placed in area that can either be hid or kept out of sight (i.e. closet or storage area).
How many places do I have to plug into?
You will have two connection points to plug into. Power strips can provide additional sockets but keep in mind of the power you have reserved for your booth space. Additional sockets do not mean additional power. Power strips are designed to trip at 1500 watts/15 amps. Use of the power strip on a
2000 watt outlet location will drop the use in that location to 1500 watts/15 amps. All orders exceeding 120 volts/20 amps provide one connection point
only. They cannot accommodate power strips and require labor.
When will my power be turned on during move-in?
Electricity will be turned on Saturday, February 10, 2018 at 10:00 AM and will be turned off Friday, February 16, 2018 at 7:00 AM.
Full facility lights will be turned on during show hours; however, some exhibitors choose to enhance the look of their booth or product by directing light to these areas. GES Electrical has different lighting options available. Contact GES Electrical department pre-show for suggestions and
Can I hang my own lights?
Exhibitors (not EAC's) may hang up to 4 arm lights per total booth space as long as the power does not exceed 2000 watts/20 amps.
Do I need to order power for the lighting I use in my booth?
Power needs to be ordered for any lights brought in by an exhibitor or EAC. Power is included for lights ordered on the Lighting section of Electrical Rental Equipment
. Power is
not included for lights ordered on the Standard Exhibit Systems and must be ordered separately.
How do I know if I need to order labor?
Referencing the Show Site Work Rules, for safety and liability reasons, GES Electrical is required to provide distribution of all electrical wiring from the
main power source (MDL) and to other power locations in your booth typically run under carpet; this is considered Floor Work labor. A good rule of
thumb for estimating your floor work labor is three extension cords per hour. You may also reference previous GES electrical invoices. Any connection
of an electrical apparatus in your booth space exceeding total combined wattage of a 2000 watt/20 amp service must also be performed by electricians.
This includes, but not limited to, hook-up of electrical equipment, distribution above carpet, installation of lights, monitors, hanging signs, and electrical
booth structures; this is considered Booth Work labor. Both types of labor can be ordered on Electrical Rental Equipment
. Accurate estimates can
help avoid additional show site labor for unscheduled returns/Go Backs. Additional electricians are billed at showsite rates. Exhibitors are responsible
for managing the labor. Please notify the service desk immediately if you are not satisfied with the labor for any reason. Dismantle labor is calculated
at 50% of the installation time and is based on the date and time the show closes and move-out time frames (overtime rates may apply); this is an
automatic charge and does not need to be scheduled. If the nature of booth requires specific dismantle requests, please advise GES Electrical service
desk. Equipment used for dismantle is billed at 1 hour minimum. Labor orders submitted for Floor Work – Exhibitor Supervised and Booth work must
provide date and time. GES does not accept will calls. This is not considered a complete order. Regular or show site rates may apply. Floor Work –
GES Supervised does not require a date and time as this labor will be performed and completed prior to your arrival, dependant on receiving power,
floor plan and payment.
Do I need to order labor to hang my lights?
Referencing Electrical Rental Equipment
for GES lights: For inline and peninsula booths that require placement in the back of the booth, labor is
included in the price of the lights. For peninsula and island booths that require placement away from the main power source and throughout the booth
space, exhibitors are required to order labor. Keep in mind, depending on location and height, equipment may be required and billed accordingly.
Typically, lights hung over 12ft require a scissor lift. Equipment rental is recommended for expediting larger quantities of light. If the lights are exhibitor
owned, outside of the 4 arm light rule, a labor order is required. If the lights are EAC owned, a labor order is required.
What if I want to use my own cords and plug strips?
Exhibitors may use their own extension cords and power strips under the regulations provided on the Electrical Safety and Regulations
(to be used over carpet only and not exposed to attendee foot traffic). Be sure to advise the electricians working in your booth that you have brought your own
materials. All materials under the carpet must be supplied by GES Electrical for safety reasons.
What is an electrical floor plan and why do I need one?
A floor plan provides the electricians with the necessary information to perform the work requested in your booth space. A floor plan must have the
following components: must be scaled, have orientation (call out the surrounding booths in accordance to front/back/sides in your booth), Main Drop
Location (MDL), and power distribution points (provide specific measurements of these locations). GES must also receive an electrical floor plan for
placements of the 1000 watt overhead lights.
How can I ensure that I receive the discount rates on my electrical order?
Be sure to submit the following by the electrical discount deadline date:
All of the items listed above must be received on or before the discount deadline date in order to receive the discount rates. If one item is incomplete or
missing, the order is considered incomplete and the outlet rates will be placed at regular rates and the labor rates will be based on when a complete
order is received. Common examples of incomplete orders are (but not limited to) unreadable floor plans, will call (missing date/time), bulk power, no
main drop location, and power/floor plan revisions. If you have any questions or concerns, please Contact Us
All floor plans are reviewed prior to show site in order to circuit a hall print for installation of power. A fee of $50.00 will be billed for this time.
If labor is scheduled and the electrician shows up and there is no one there to direct them, there will be a 1 hour not ready charge billed per worker
requested. You will need to go to the service desk when you are ready to place a new order. Show site labor rates may apply.
Laborers are required when ordering booth work labor for installation of monitors over 37” and when cords need to be fished under carpet for floor work
Additional charge of $195.00 will be applied for every 1000 watt overhead light ordered when your booth is located in certain areas due to the nature of
the building and equipment required to install these lights.
Materials are charged on an as needed bases and are added to your invoice. Be sure to budget for these incidentals like extension cords, plug strips
and tape. GES Electrical can assist you in estimating, though it is difficult to predict the length and amount needed until work is actually performed.